Eagle Home Products Eagle Series User Manual download pdf (Page 38)

32 • Setup Mode Eagle Instruction Manual

Updating the Alarm Point Settings

Each of the Eagle’s gas detection channels includes low and high gas

alarms. The combustible gas channel also includes low and high

alarms for PPM readings; the toxic gas channels also include STEL

and TWA alarms.

This screen allows you to update one or more alarm points (the

reading at which the Eagle recognizes the alarm).

1. From the main menu, select the ALARM POINTS menu option.

2. Select the channel of the alarm point you want to update. The

channel’s Set Low Alarm Point screen displays (in this example for

the combustible gas channel).

NOTE: The Eagle displays the set alarm point screens for each

channel in the following sequence: low alarm, high alarm,

TWA alarm (toxics only), and STEL alarm (toxics only).

If this is the alarm point you want to update, continue with step 3. If

not, continue pressing the POWER/ENTER button until the correct

set alarm point screen displays, then continue with step 3.

3. Use the AIR/▲ and SHIFT/▼ buttons to display the desired

setting.

4. Press the POWER/ENTER button to enter the new alarm point

and scroll to the next set alarm point screen. (Repeat step 3 and 4

to update another alarm point for this channel.)

5. Press the POWER/ENTER button to scroll to the last set alarm

point screen for this channel, then press the POWER/ENTER

button again to return to the Set Alarm Points menu.

6. Repeat steps 2 through 5 until all desired alarm points are

updated. Make sure you return to the Set Alarm Points menu to

continue.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 79 80

No comments

Eagle Home Products Eagle Series User Manual Page 38