Eagle Home Products Eagle Series User Manual download pdf (Page 22)

16 • Alarms Eagle Instruction Manual

Low ﬂow alarm

If the Eagle’s sample system becomes restricted or blocked (for

example plugged probe, fouled ﬁlter, pinched tubing):

• The message FAIL LOW FLOW LEVEL replaces the normal screen.

• The buzzer sounds a steady tone.

• The alarm lights are on continuously.

• The pump automatically shuts off to prevent damage.

Correct the ﬂow blockage. Press the RESET/SILENCE button to turn

off the alarms and restart the pump. If low ﬂow conditions still exist,

the Eagle will go into alarm again. If the condition cannot be corrected

immediately, take the Eagle out of service to a non-hazardous area.

Low battery alarm

When the battery charge drops near the lower limit, the Eagle

displays the following screen (BAT ﬂashes). For alkaline batteries, you

have approximately 3 hours of use remaining; for Ni-Cd batteries you

have approximately 15 minutes of use remaining.

When the battery voltage drops to the minimum limit, the following

screen displays, the alarm lights are on continuously, and the buzzer

sounds a steady tone. The Eagle is not operational as a gas monitoring

device when this screen displays.

NOTE: If you are using the data logging accessory and the Eagle goes

into Low Battery ALARM, shut off the Eagle in order to save

the current data logging session.

Low Battery

Warning

Low Battery

ALARM

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

No comments

Eagle Home Products Eagle Series User Manual Page 22