Eagle Home Products Eagle Series User Manual download pdf (Page 31)

Eagle Instruction Manual Setup Mode • 25

Updating Channel Settings

This procedure describes how to update channel settings for the

combustible gas, oxygen, and toxic gas channels.

CAUTION:Verify that the correct sensor is installed before you update a

channel’s settings.

Updating combustible gas channel settings

This section describes how to update the target gas label, set a custom

gas label, and update the fullscale PPM setting for the combustible gas

channel.

Updating the target gas label

1. From the main menu, select the GAS COMBINATIONS menu

option.

2. Use the AIR/▲ or SHIFT/▼ button to place the prompt next to

the combustible gas channel (in this example CH4).

3. Press the POWER/ENTER button. The combustible gas target gas

label ﬂashes. This indicates that this setting can now be updated.

4. Press the AIR/▲ or SHIFT/▼ buttons to display the available

combustible gas target gas labels (CH4, HEX, H2, ***, and NOT

USED).

NOTE: Select the HEX or *** setting for Methane Elimination

(see “Appendix B: Methane Elimination” on page 52 for more

information.)

5. Press the POWER/ENTER button to enter the new target gas label.

A screen displays that shows the fullscale PPM setting, which

corresponds to 100% LEL, and display increments for the target

gas label you selected. If you select *** as the gas label, you must

update the fullscale PPM setting to correspond to 100% LEL for

the target gas.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 79 80

No comments

Eagle Home Products Eagle Series User Manual Page 31